Skip to main content

FOLIANT Taurus 400 NG

The FOLIANT Taurus 400 NG is a next generation of popular SF version. It is very compact industrial laminating machine, constructed for a heavy duty digital and offset outputs lamination. It is equipped with an integrated suction feeder and a high speed bump separator.  Several options are available for the Mercury machine – Foliant Foiler, non-sticky pressure roller, pallet stacker, etc.  Due to its high pressure system, format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and very high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 40 m/min., while performance is 4800 sheets per hour of B3 portrait (white paper 200 gsm).

Feeder

The FOLIANT Taurus 400 NG is equipped with a rising pile back separation stream feeder and with a suction feed head made by Foliant. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The feeder is fitted with a lifting plate and its capacity is a 54 cm pile of paper.

Laminator

The FOLIANT Taurus 400 NG laminator maximum sheet size is 40 x 70 cm. The minimum sheet size is 32 x 25 cm (A4).The FOLIANT Taurus 400 NG machine is a single sided thermal industrial laminator, laminating the 115 – 600 gsm paper.
The laminating unit is equipped with an adjustable twin decurl unit:

  • With a decurl blade for offset printed sheets decurling
  • With a decurl roller for digital printed sheets decurling (to prevent the scratches on sheets printed on both sides by digital print with sensitive inks).

The roll of a film is mounted on an air shaft that allows very convenient, easy and precise film positioning. The shaft capacity is up to 3000 m of the 24 - 42 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel. The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge. The machine is fitted with OMRON Programmable Logic Controllers, which control all machines’ functions. The used PLC system includes many automation items for an easy control of the machine and a reliable lamination. The whole machine is controlled by an interactive easy understandable icon touch screen panel – no language version is needed.

Separator

The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Laminating Films

The machine laminates the BOPP films (24 – 42 microns) and Nylon films (24 - 35 microns). The PET films (20 - 26 microns) can be laminated with the optional module only.

Safety Measurements

FOLIANT Taurus 400NG is certified by independent testing laboratory DGUV Test and obtained GS mark ("Tested Safety"). The measurements for operators safety are better then required by law in order to minimize injuries.


ParameterValue
Maximal Speed
single side 40 m/min
Feeding System
automatic, Suction Feeder Foliant, Feeder's Capacity 54 cm
Overlaps
Automatic, PLC Controlled, Overlaps Accuracy ± 2 mm
Separation
Automatic, bump rollers
Paper Weight
115–600 g/m²
Main Roller Pressure System
Pneumatic
Compressor
External, 150 l / min, 6-8 bar
Minimal Sheets Size (w×l)
32×25 cm
Maximal Sheets Size (w×l)
40×70 cm
Maximal Performance
3240 B3 / hod.
Temperature Control
80–140 °C, Warming Up Time 8 min
Power Supply
3 f., 400V AC, 50-60 Hz
Power
5900 W
Mechanical Parameters
Floorspace (w×l) 105×230 cm, Weight: 495 kg
Modular Stand
Pallet Stacker
integrated automatic, Capacity ~70 cm
Non-sticky pressure roller
Air Shaft
Standard


FOLIANT Taurus 400 NG Optional Accessories