Čeština (Česká republika)English (United Kingdom)
Thanks to its design and the colors selected, the FOLIANT Laminators have been branded the YELLOW MACHINES around producers of one-sided laminators, their distributors, and printers from all the world.
Sun 16. December 2018
Login Form

Home Offset Lamination B1
FOLIANT Taurus 760 NG Print E-mail
 taurus 760 ng w pallet stacker

FOLIANT Taurus 760 NG

Datasheet - Foliant Taurus 760 NG datasheet.pdf

Layout - Foliant Taurus 760 NG layout.pdf

The FOLIANT Taurus 760 NG is a next generation of popular SF version. It is very compact and fast industrial laminating machine, constructed for non-stop work. It is equipped with a suction feeder, high speed bump separator and options like pallet stacker or Foiler.  Due to its format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B1+ lamination too. The machine maximum speed is up to 30 m/min., while performance is up to 1700 sheets per hour of B1 portrait (white paper 200 gsm).


Max Speed
30 m / min.
Feeding Automatic
Feeding System
Suction Feeder Foliant
Feeder's Capacity
40 cm
Overlaps Automatic, PLC Controlled
Overlaps Accuracy + / - 2 mm
Separation Automatic, Bmp Rollers
Paper Weight 115 - 600 gsm
Main Rolles Pressure
External Compressor Requirements
150 l / min, 6-8 bar
Min. Sheet Size (w x l)
20 x 30 cm
Max. Sheet Size (w x l)
76 x 110 cm
Max. Performance 1700 B1 / hour
Warming up Time
8 min.
Temperature Control
80 - 140°C
Heating System
Direct Heat Rings
Power Supply
3 ph., 400V AC, 50-60 Hz
Power 8000 W
Dimmensions incl. Jogger
140 x 330 cm
Weight 680 kg
 Film Micro Adjustable Airshaft
Foliant Foiler
 Jogger 760 Optional
 Film Loader (electric) Optional
 Module for PET film processing


The FOLIANT Taurus 760 NG is equipped with a rising pile back separation stream feeder and with a suction feed head. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The standard feeder is fitted with a lifting plate and its capacity is a 40 cm pile of paper.


The FOLIANT Taurus 760 NG laminator maximum sheet size is 76 x 110 cm. The minimum sheet size is 20 x 30 cm (A4).The FOLIANT Taurus 760 NG machine is a single sided thermal industrial laminator, laminating the 115 – 600 gsm paper, with an unique „U“ cross bar for perfect lamination of thin sensitive sheets. The laminating unit is equipped with twin decurl unit adjustable during run:

  • With a decurl blade for strong de-curling effect. The intensity is adjusted by the angle of the blade.
  • With a decurl roller for weaker effect. The back print is protected during the de-curling because the paper it not rubbing against the roller but it is rotating together with it.

The roll of a film is mounted on an air shaft that allows very convenient, easy and precise film positioning. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller which consists of several rings mounted directly to inner wall of the roller. This ensures that heat transfer is perfect even at maximum speed. A sensitive temperature sensor is also inside the roller as close to surface as possible. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge.


The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Laminating films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 25 microns) can be laminated with the optional module only.

Safety Measurements

FOLIANT Taurus 760NG is certified by independent testing laboratory DGUV Test and obtained GS mark ("Tested Safety"). The measurements for operators safety are better then required by law in order to minimize injuries.



  • Jogger 760*

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is 10 cm pile of sheets. Suitable for every paper weight

  • Foliant Foiler

Winding device that allows use of metalized film (gold, silver, red, etc.) and spot varnish film. Such films sticks to print from digital printing machine only and unused film have to be winded again.

  • PET Films Lamination Module

It is module integrated inside the separator for the PET films processing (max. 25 microns).

  • Film Loader / Manipulator

 It is an electric lift with a film core adaptor for loading heavy rolls of film (max. capacity 125 kg). The device is not integrated with the machine.  It is only connected with the machine electric circuits.

*Important - the machine have to be operated either with Jogger or Pallet Stacker.


 air-shaft low

 metalized film imprinting unit

 feeding head taurus



© FOLIANT EU s.r.o., Štefánikova 1347/III, CZ 293 01 Mladá Boleslav, Czech Republic, společnost je registrována u Krajského obchodního soudu se sídlem v Praze, oddíl C, vložka 56662. IČO: 25634569, DIČ: CZ25634569 | webmaker spojenec.eu