Čeština (Česká republika)English (United Kingdom)
Thanks to its design and the colors selected, the FOLIANT Laminators have been branded the YELLOW MACHINES around producers of one-sided laminators, their distributors, and printers from all the world.
Mon 23. July 2018
Login Form



Home Offset & Digital Laminat. B2
FOLIANT Taurus 530 NG Print E-mail
 taurus 530ng

FOLIANT Taurus 530 NG

The FOLIANT Taurus 530 NG is a next generation of popular SF version. It is very compact and fast industrial laminating machine, constructed for non-stop work. It is equipped with a suction feeder, high speed bump separator and many options like non-sticky roller pallet stacker or Foiler.  Due to its format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B2+ lamination too. The machine maximum speed is up to 40 m/min., while performance is up to 3400 sheets per hour of B2 portrait (white paper 200 gsm). It means the performance is 14% higher than its SF predecessor.

 

Max Speed
40 m / min.
Feeding Automatic
Feeding System
Suction Feeder Foliant
Feeder's Capacity
54 cm
Overlaps Automatic, PLC Controlled
Overlaps Accuracy + / - 2 mm
Separation Automatic, Bmp Rollers
Paper Weight 115 - 600 gsm
Main Rolles Pressure
Pneumatic
External Compressor Requirements
150 l / min, 6-8 bar
Min. Sheet Size (w x l)
20 x 30 cm
Max. Sheet Size (w x l)
53 x 75 cm
Max. Performance 3400 B2 / hour
Warming up Time
8 min.
Temperature Control
80 - 140°C
Heating System
Direct Heat Rings
Power Supply
3 ph., 400V AC, 50-60 Hz
Power 7000 W
Dimmensions incl. Jogger
120 x 230 cm
Weight 530 kg
 Film Micro Adjustable Airshaft
Standard
 XL Module (53 x 100 cm) Optional
 Jogger 530 Optional
 Pallet Stacker - integrated automatic
Optional
 Integrated Stacker Capacity
70 cm
 Pallet Stacker - semiautomatic
Optional
 Semiautomatic Stacker Capacity 73 cm
 Film Loader (electric) Optional
 Module for PET film processing
Optional
 Non-sticky pressure roller
Optional
 Foliant Foiler
Optional

 Feeder

The FOLIANT Taurus 530 NG is equipped with a rising pile back separation stream feeder and with a suction feed head. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The standard feeder is fitted with a lifting plate and its capacity is a 54 cm pile of paper.

Laminator

The FOLIANT Taurus 530 NG laminator maximum sheet size is 53 x 75 cm, extendable to 100 cm with optional XL module. The minimum sheet size is 20 x 30 cm (A4).The FOLIANT Taurus 530 NG machine is a single sided thermal industrial laminator, laminating the 115 – 600 gsm paper, with an unique „U“ cross bar for perfect lamination of thin sensitive sheets. The laminating unit is equipped with twin decurl unit adjustable during run:

  • With a decurl blade for strong de-curling effect. The intensity is adjusted by the angle of the blade.
  • With a decurl roller for weaker effect. The back print is protected during the de-curling because the paper it not rubbing against the roller but it is rotating together with it.

The roll of a film is mounted on an air shaft that allows very convenient, easy and precise film positioning. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller which consists of several rings mounted directly to inner wall of the roller. This ensures that heat transfer is perfect even at maximum speed. A sensitive temperature sensor is also inside the roller as close to surface as possible. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge.

Separator

The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Laminating films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 25 microns) can be laminated with the optional module only.

Safety Measurements

FOLIANT Taurus 530NG is certified by independent testing laboratory DGUV Test and obtained GS mark ("Tested Safety"). The measurements for operators safety are better then required by law in order to minimize injuries.

gs

Options

  • Jogger 530*

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is 10 cm pile of sheets. Suitable for every paper weight

  • Pallet Stacker – Integrated Automatic*

Fully automatic motorized device that unloads laminated sheets into a high pile on pallet. Its capacity is 73 cm of paper. Pile of the paper is made by pneumatic side and back stops. One trolley with wheels included.

  • Pallet Stacker - Semiautomatic*

Simplier version of Pallet Stacker. The pallet is placed on scissors hydraulic forklift. Movement down is controller by machine. Movement up have to be dony by operator manually pumping with the lift. Pile of paper is made by pneumatic back and side stops. Capacity is 70 cm of paper. One pallet included.

  • Foliant Foiler

Winding device that allows use of metalized film (gold, silver, red, etc.) and spot varnish film. Such films sticks to print from digital printing machine only and unused film have to be winded again.

  • Module for sheets 53 x 100 cm lamination

It is an extension of feeding table and feeding head mount for lamination of sheets with size up to 53 x 100 cm. Sheets above 75 cm cannot be unloaded to Integrated pallet stacker.

  • Non-sticky pressure roller

 Standard pressure roller is replaced by roller with special non-sticky surface. Melted glue from film cannot stick to it at all even under heavy pressure. Cleaning of such roller is not  necessary at all. Allows lamination of sheets with cut out windows.

  • PET Films Lamination Module

It is module integrated inside the separator for the PET films processing (max. 25 microns).

  • Film Loader / Manipulator

 It is an electric lift with a film core adaptor for loading heavy rolls of film (max. capacity 125 kg). The device is not integrated with the machine.  It is only connected with the machine electric circuits.

*Important - the machine have to be operated either with Jogger or Pallet Stacker.

 

pallet stacker - standard

 

mercury stacker

 

air-shaft low

 

metalized film imprinting unit

 

 feeding head taurus

 

Jogger-530-film-loading-crane

taurus 530ng 2

 

© FOLIANT EU s.r.o., Štefánikova 1347/III, CZ 293 01 Mladá Boleslav, Czech Republic, společnost je registrována u Krajského obchodního soudu se sídlem v Praze, oddíl C, vložka 56662. IČO: 25634569, DIČ: CZ25634569 | webmaker spojenec.eu